Jet pipe for AVANTI MINI 45 - 70N 105,91 EUR
16 % VAT incl. excl. Shipping costs
Weight: 0.80

Product no.: AVMXL
Print product data sheet Jet pipe for AVANTI MINI 45 - 70N
Shipping time: 1 Week
Jet pipe for AVANTI MINI 45 - 70N
Bild vergrössern
Jet pipe for AVANTI MINI 45 - 70N
Bild vergrössern
Jet pipe for AVANTI MINI 45 - 70N
Bild vergrössern

This jet pipe is for the little AVANTI in combination with a Kingtech 45 / 70*. It is double walled, very light, and is delivered with fixing materials.The inlet is detachable for easier installation.The turbine exhaust position is 40 mm inside the orange inlet ( position in article picture not correct )

By the way - we also carry a fitting vector thrust unit for the Mini Avanti ( in combination with this jet pipe ) Order number is GVM

Weight approx. 220 grams

ATTENTION: if you intend to use a smaller turbine like the P 20 or Kolibri, you need to order the smaller type jet pipe " AVM " !

For the use with a Wren MW 44, you need to order the pipe AVM44  (this pipe is slightly longer)

*it is reccommended to reduce the power, the pipe can handle 70N, but the model structure might be overextended



This Product was added to our catalogue on Monday 18 May, 2015.

Customers who bought this product also bought the following products:
Jet pipe for CARF SPARK
102,18 EUR
16 % VAT incl. excl. Shipping costs
1 x 'Jet pipe for CARF SPARK' order
Jet pipe for Avanti 80 from Freewing
131,73 EUR
16 % VAT incl. excl. Shipping costs
1 x 'Jet pipe for Avanti 80 from Freewing' order
TYGON tube 3.2mm
6,53 EUR
16 % VAT incl. excl. Shipping costs
1 x 'TYGON tube 3.2mm' order
G-TRIM BLACK
45,81 EUR
16 % VAT incl. excl. Shipping costs
1 x 'G-TRIM BLACK' order
Jet pipe for AVANTI
391,60 EUR
16 % VAT incl. excl. Shipping costs
1 x 'Jet pipe for AVANTI "VECTOR"' order
Horns 21 mm
5,36 EUR
16 % VAT incl. excl. Shipping costs
1 x 'Horns 21 mm' order

Parse Time: 0.484s